EAE Cable Tray Systems & Cable Ladders
UK Pre-galvanized Cable Trays
- The UKF and UKE series pre-galvanized cable trays are the best alternatives for indoor cable tray systems due to their robust construction and affordable prices
- Easy mounting without additional accessories due to the Snap-On system (UKFG-C)
- UK Cable trays are manufactured with pre-galvanized sheet metal
- The sheet material undergoes a hot-dip method in the pre-production phase, resulting in a total zinc coating thickness of approximately 10 – 14 μm on both surfaces
- Manufacturing is carried out in accordance with TS EN 10346 and TS EN 10143 standards
- Can be used in areas classified as C1 and C2 corrosion categories
UKFG
- Standard length is 3050 mm
- Self-locking joint assembly produced in widths of 100 – 200 – 300 mm at 0.7 mm thickness and 400 – 500 – 600 mm in 0.9 mm thickness
- Side heights are available in dimensions of 40 – 50 – 60 – 75 – 100 mm
- Side height products of 75 mm and 100 mm are with overlapping covers
- Fire resistance certificates (E30 – E60 – E90)
UKE
- Produced in thicknesses of 0.8 / 1 / 1.2 / 1.5 / 2 mm
- Side heights are available in dimensions of 40 – 50 – 60 – 75 – 100 mm
- Universal cable carriers with a width of up to 50 – 100 – 150 – 200 mm are made of 0.8 / 1 mm thick sheet
metal, those with a width of up to 250 – 300 mm are 1.2 mm thick, and those with a width of up to 300 – 400 – 500 – 600 mm are made of 1.5 / 2 mm thick galvanized sheet metal - Wide range of accessories and modules
- Standard length is 3000 mm
- Uses galvanized sheet metal in accordance with TS EN 10346 and TS EN 10143 standards
UKD
- No holes on the body
- Provides protection against dust when used with a cover
- Compatible with UKE modules
- Wide variety of accessories
- Produced in thicknesses of 0.8 / 1 / 1.2 / 1.5 / 2 mm
UKN-E
- Compatible with UKE modules
- Universal cable carriers with a width of up to 50 – 100 – 150 – 200 mm are made of 0.8 / 1mm thick sheet
metal, those with a width of up to 250 – 300 mm are 1.2 mm thick, and those with a width of up to 300 – 400 – 500 – 600 mm are made of 1.5 / 2 mm thick galvanized sheet metal - Side heights are available in dimensions of 40 – 50 – 60 mm
- Edges are not bent
- Standard length is 3000 mm
- Wide variety of accessories
UKFE
- Produced in widths of 100 – 200 – 300 mm at 0.7 mm thickness and 400 – 500 – 600 mm in 0.9 mm thickness
- Special shapes and materials used on the channel allow it to carry approximately the same load as classic
thickness products - Side heights are available in dimensions of 40 – 50 – 60 – 75 – 100 mm
- Side height products of 75 mm and 100 mm are with overlapping covers
- Compatible with UKE modules
- Fire resistance certificates (E30 – E60 – E90)
CT Hot Dip Galvanized Cable Trays
- Supplied in widths of 50 – 100 – 150 – 200 – 250 – 300 – 400 – 500 – 600 mm (optional widths of 700 – 800 – 900 mm available on request)
- Lengths of 3000 mm (optional lengths of 6000 mm)
- Fire resistance certificate (E30 – E60 – E90)
- Optional coating available (Epoxy, Epoxy Polyester and Polyester)
- The steel material undergoes a hot dip galvanizing process during the production stage, resulting in an average total zinc coating thickness of 45 – 55 μm on both surfaces
- It is produced in accordance with TS EN ISO 1461 standard
- It can be used in areas with C3, C4, C5 and C6 corrosion categories with coating thickness and paint usage varying according to the corrosion category
CTH-CTA
- Supplied in widths of 100 – 150 – 200 – 250 – 300 – 400 – 500 – 600 mm (optional widths of 700 – 800 – 900 mm available on request)
- Hot dipped in accordance with the standard TS EN ISO 1461, followed by EAE specific special protective coating of hot dipping
- Features holes with a diameter of 20.5 mm at the center of the cable tray, enabling the installation of various accessories (facilitates quick assembly of devices such as lighting fixtures, fire detectors, etc.)
- Ample variety of accessories
- Available in lengths of 3000 mm (optional lengths of 6000 mm)
- Fire resistance certifications (E30 – E60 – E90)
- Optional coating on galvanized manufacturing (Epoxy, Epoxy Polyester, and Polyester)
CTN
- Manufactured as hot dipped in accordance with the TS EN ISO 1461 standard
- Compatible with CTE modules
- Ample variety of accessories
- Fire resistance certification (E30 – E60 – E90)
CTHF-E
- 0.7 mm thickness is used with a width of 100 – 200 – 300 mm and 0.9 mm is used with a width of 400 – 500 – 600 mm
- Manufactured as hot dip in accordance with the standard TS EN ISO 1461
- Thanks to the special form of the tray and the raw materials used, it has the capability to support almost the same load as products with
customary thickness - Compatible with CTE modules
- Ample variety of accessories
- Fire resistance certifications (E30 – E60 – E90)
TLS Wire Mesh Cable Trays
- 4 – 5 mm mesh trays, produced in electrogalvanized, hot dip galvanized, and stainless steel options
- Height is 35 – 55 – 75 – 85 and 100 mm and the width can be up to 50 – 100 – 150 – 200 – 250 – 300 – 400 – 500 – 600 mm
- Wires used in the tray vary between Ø4 mm and Ø5 mm
- Ventilation: the woven structure allows for excellent ventilation, preventing overheating and damage
- Lightweight Design: the lightweight construction makes transport and installation easier
- Hygienic Industries: these trays are commonly used in industries where hygiene is a priority, such as the food production industry, and in data centers and low-voltage installations
- Flexibility: their lightweight and flexible design makes them ideal for curved transitions, and their open-top design makes cable routing easier
- Wide range of accessories, clamps, and elbow options are available
KM Foldable Pre-galvanized Ladders
- Made in strip-galvanized versions up to 900 mm wide, with a full range of accessories and fittings
- Custom 700 – 800 – 900 – 1000 mm wide
- Optional coating available (Epoxy, Epoxy Polyester and Polyester)
- Foldable in one direction: this design offers advantages in shipping and storage
- Material: KM cable ladders are made from pre-galvanized sheet metal
- Galvanization process: the sheet metal undergoes a hot dip galvanization process in the pre-production phase, with a total coating thickness of approximately 10 – 14 μm on both sides of the material
- Standards compliance: produced in accordance with TS EN 10346 and TS EN 10143 standards
- Corrosion resistance: suitable for use in areas classified under C1 and C2 corrosion categories
- Standard length of 3000 mm (optional 6000 mm lengths)
- The strength (load carrying capacity) of the cable ladders is enhanced by the special design of the lateral walls
- Can be utilized in horizontal rack applications on lateral walls, offering significant cost advantages
- Equally spaced traverse structure at 300 mm intervals
- Provides more cable space compared to conventional ladders due to a unique traverse height system
- Fire resistance certifications (E30 – E60 – E90)
KCA OG Cable Ladder with Extra Load Capacity
- Cable ladder made of stainless steel material, which has excellent cable holding capacity thanks to the extra heavy duty structural design
- Available in 3000 mm and 6000 mm lengths
- Optionally can be ordered with epoxy polyester powder coating in a range of RAL code colors, the painted elements are highly corrosion resistant and resistant to chemicals
- KCA OG is designed to be used as cable transport systems in petrochemical plants, power plants, and heavy industrial facilities
- It has high load carrying capacity due to its specially designed side walls
- Since the cable tray is manufactured in 6000 mm individual pieces, it can be suspended at intervals of 6 meters, thereby reducing the required number of support materials
- Successfully tested under the conditions specified in the DIN 4102-12 (E90) standard, withstanding 1000°C fire conditions for 90 minutes
- Effectively tested at -70°C
- Tested according to IEC 61437 standard and certified by DEKRA
- Tested according to NEMA VE-1 standard and certified by DEKRA
- H150 mm cable ladders have a carrying capacity of NEMA 20C
- Tested and certified according to IEC 61537
- Superior quality hot dipped galvanized, hot dipped galvanized by utilizing superior silicon steel, manufactured from 316L quality stainless raw material
- Flexible manufacturing solutions for various requests
- KCA Solutions with all the features listed above can be manufactured with the KCA OG series cable tray / cable ladder systems
KCA - GRP Glass Reinforced Polyester Resin Extra Heavy Cable Ladder
- Sets the industry standard for cable support systems worldwide
- It has a unique combination of high strength, flexibility and lightweight design
- Designed for superior load strength in its class, superior resistance to impact and environmental factors
- KCA – GRP is designed for the oil and gas industry, power plants and heavy industrial solutions
- With the special design of side rail, cable bearing capacity is enhanced
- Composite: side walls are manufactured of glass-reinforced polyester material
- Tested according to IEC 61537 and certified by DEKRA
- Tested according to NEMA FG-1 (UL568) standard and certified by DEKRA
- H150 mm cable ladders have a NEMA 20C load capacity
- H100 mm cable ladders have a NEMA 12C load capacity
- The glass fiber reinforced polyester products are made from high-quality materials and offer excellent fire resistance
- High corrosion resistance
- UV resistance
- Non-flammable material (ASTM-E84; Class-1)
- Self-extinguishing (UL 94 V0 rated)
- Does not emit toxic fumes when exposed to fire (Halogen-Free Certification)
- Long lifespan
- Low maintenance costs
- Insulating properties
- Lightweight
- Low labor costs
- Quick and easy installation
- Low shipping costs
CTA - GRP Glass Reinforced Polyester Resin Extra Heavy Cable Tray
- IECTA – GRP cable trays are IEC 61537 certified and tested according to the DEKRA certification standards
- These cable trays come in various load and span configurations, with performance tests conducted under standard static loads for IEC 61537 load testing in multi-span configurations
- High Corrosion Resistance: ideal for use in environments prone to corrosive conditions, providing durability and long-lasting performance
- Fire Resistance: non-combustible (ASTM-E84; Class-1) and has self-extinguishing properties (UL 94 V0)
- Toxic Gas-Free: does not emit toxic gases when exposed to fire (Halogen-Free Certification), ensuring safety
- Long Service Life: materials durability leads to an extended product lifespan, reducing the frequency of replacements
- Low Maintenance Costs: the high resistance to corrosion and fire means reduced need for repairs or replacements, minimizing long-term maintenance costs
- Electrical Insulation: offers insulation properties, making it safe for use in electrical systems
- Lightweight: easy to handle and install, reducing transportation and installation costs
- Quick and Easy Installation: designed for fast setup, cutting down on labor costs
- Low Shipping Costs: the lightweight design also helps reduce shipping expenses
- These trays are designed to meet demanding industry standards, providing exceptional performance in high-risk and challenging environments
- CTA – GRP offers high production capacity, fast delivery times, and custom production solutions upon request
- CTA – GRP is designed to be used as a cable tray system in petrochemical facilities, power plants, and heavy industrial plants
REFERENCES
our businesses
